Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hybrid S464LG - (PC+ABS) - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hybrid S464LG:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hybrid S datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 14 cm³/10min ISO 1133
Temperature 260 °C -
Load 5 kg -
Molding shrinkage, parallel 0.6 % ISO 294-4, 2577
ASTM Data
Melt Flow Index, MFI 15 g/10min ASTM D 1238
Temperature 260 °C -
Load 5 kg -
Mold Shrinkage, MD 0.006 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Yield stress 52 MPa ISO 527
Strain at break >50 % ISO 527
Flexural modulus, 23°C 2230 MPa ISO 178
Izod notched impact strength, +23°C 37 kJ/m² ISO 180/1A
ASTM Data
Tensile Strength at Yield 51.7 MPa ASTM D 638
Elongation at Break 55 % ASTM D 638
Flexural Modulus 2210 MPa ASTM D 790
Izod Impact notched, 1/8 in 530 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 112 °C ISO 75-1/-2
ASTM Data
DTUL @ 264 psi 110 °C ASTM D 648
Other propertiesValueUnitTest Standard
Density 1130 kg/m³ ISO 1183
Density 1130 kg/m³ ASTM D 792
Characteristics
Processing
Injection Molding
Delivery form
Pellets
Applications
Automotive, General Purpose
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.